| |
| |
| | |
| 发布时间： | 2007-2-26 | | | 有 效 期： | 三个月 | | 公 司： | | | 联 系 人： | | | 交货说明： | | | | |
|
| 网上信息 | 铝型材数控双头切割锯LJZ2-CNC-500×4200
Double-head Cutting Saw CNC for Aluminurm Profile LJZ2-CNC-500×4200
◆进口数控系统，数字控制切割长度，尺寸准确
◆进口滚珠丝杠带动机头左右移动，重复定位精度高
◆可同时输入一系列优化长度数据，实现连续依次切割
◆锯片主轴采用高精密主轴，专用进口硬质合金锯片
◆切割进给运动与机头的左右移动导轨，均采用进口直线轴承运动副
◆锯处于进给由液压阻尼气缸提供动力
◆加工范围大，切割长度达4200mm，切割角度为90°、45°、22.5°三种角度按钮自动转换
◆后托料架随活动机头的运动自动伸缩
◆安全罩随锯片的退、进自动起落，安全性好
◆气控阀控制摆角气缸，避免电磁阀长期带电引起失效
The machine specialized led for the importable data-con-trolled system.The data control the range of cutting precisely.The importable cylinder can make the machine move left and right.Imputting a series of data ,the machine can cut contlnuously and successively . The main axle are made precisely and specialized for the importable allpy . The moving of saw is motirated by the hydraulic damper cylinder . The machine can produce the large range and the length of cutting can arrive 4200mm , the cutting angles are 90,45 and 22.5,the can change into another automatically The frame can go and back rautomatically with the head of the machine . The safety precaution can up and down with the saw safely . The tyre air valves coiltrol the corner cylinder , avoid the electricity of the machine.
|
| |
